bucket elevator used for mineral processing

specialized production bucket elevator 1.Drive power is small 2.Ascending scope 3.Operation reliability 4.Long service

Bucket elevator from Bangke manufacturer

Usage of the bucket elevator:

I plant PL Vertical bucket elevator for conveying a large proportion of bulk materials, such as coal, ore, gravel, rubble and so on.

Working Principle and structure of bucket elevator: 

The characteristics of the slow elevator gravity discharge, the use of chain plate as the drive components, transportation of materials from the lower section of uniform feed material inlet, the upper section of the use of self-respect and relieved. Transportation of materials to be in the 200-250°C temperature range.

There are three specifications: PL250, PL350, PL450 .

PL250 type bucket elevator traction components, a single chain angular hopper fixed on the back of the chain. PL350, PL450 type bucket elevator traction components, fixed by double chain chain on both sides of the large-capacity hopper.

The transmission capacity of the machine 22-100 m 3 / hour, a high degree of 4-30 meters. To meet the various requirements, this machine has a variety of production method and installation method.

The specification of the bucket elevator:

Hoist Model		PL-250		PL-350		PL-450
		ξ=0.75	ξ=1	ξ=0.85	ξ=1	ξ=0.85	ξ=1
Transmission capacity(m³/h)		22.3	30	50	59	85	100
Hopper	Capacity(L)	3.3		10.2		22.4
	Bucket from(chain pitch)(mm)	200		250		320
Chain weight hopper(kg/m)		36		64		92.5
Chain size(small shaft diameter Xpitch to X to allow tension)(mm)		20×200×1600		20×250×2500		24×320×2500
Sprocket teeth	Drive sprocket	8		6		6
	Tension sprocket	6		6		6
Velocity hopper(m/s)		0.5		0.4		0.4
Transmission chain wheel revolutions		18.7		15.5		11.8
Geneeral fragmentation material(mm)		55		80		110
The largest blockof degrees(no more than10%)(mm)		75		110		150

For different requirements, PL-type bucket elevator system of the following methods and equipment of different methods (see above):

1, According to the form of the upper section of the discharge port is divided into two X1 system of law - with a discharge port flange tilt X2 system of law - with the horizontal flange of the discharge port

2, Press Department in the form of feed opening section is divided into two J1 system of law - the mouth of the slope of feed into the 45 º angle with the horizontal method for making J2 - feed the mouth of the slope angle of 60 º with the horizontal plane

3, By the middle of the side view the location of the door casing is divided into four K1 system of law - with the bottom of the left side of the middle chassis view door K2 system of law - the middle of the bottom of the right chassis side view with door

4, According to the middle position of the door casing end view method for making two types of Z1 - intermediate case with a lower end view door Z2 system of law - the middle of the top view with the door face case

5, by transmission of the relative position of elevator equipment is divided into two left - the left side gear (see above) the right equipment gear on the right (see above).

 

Solemn Promise:

The quality guarantee period for machines is one year except the wearing parts.

Welcome to our factory! For more information, please visit our website: www.bkcrusher.com

bucket elevator used for mineral processing